Svenska Designer →

5×4 m raised freestanding deck – plans, timber list and sizes

This 5×4 m raised freestanding deck (20.0 m²) is carried by joists 45×145 at 551 mm c/c on beams 2 × 45×195 and posts 95×95, 9 footings in total. The sizes are calculated for 2.5 kN/m² imposed load and snow zone 2.0 – the cheapest combination of standard timber that passes bending, shear and deflection.

Frame drawing: 5×4 m raised freestanding deck
Frame drawing · 5×4 m raised freestanding deck · Download drawing (PNG)

Quick facts

Area
20.0 m²
Joists
45×145 c/c 551
Beams
2 × 45×195
Posts
9 × 95×95
Footings
9
Boards
20
Total timber
91 m

Member sizes

MemberSizeUtilisationGoverning
Joistsspan 1.96 m · c/c 551 mm · g 0.14 kN/m, q 1.38 kN/m 45×145 c/c 551 51% bending
Beams3 rows · span 2.30 m between posts · g 0.56 kN/m, q 4.89 kN/m 2 × 45×195 78% bending
Postslength 0.78 m · N 12.5 kN (G+Q) · unbraced, Lef = 2L 95×95 27% buckling

Joist size by imposed load

Imposed load (kN/m²)Size
2.0 45×120 c/c 551
2.5 45×145 c/c 551
3.5 45×145 c/c 551
4.0 45×145 c/c 551

Timber list

QtySizeLengthTreatment
2 45×145 5.1 m Pressure treated NTR/AB
10 45×145 4.2 m Pressure treated NTR/AB
6 45×195 5.1 m Pressure treated NTR/AB
1 95×95 4.2 m Pressure treated NTR/AB
1 95×95 3.6 m Pressure treated NTR/AB

Good to know

FAQ

What size joists do I need for a 5×4 m raised freestanding deck?

45×145 at 551 mm c/c is enough for 2.5 kN/m² imposed load. That uses 51% of the capacity under Eurocode 5.

How big do the beams need to be?

The beams are 2 × 45×195. Always join beams over a post.

How much timber does it take?

The frame takes 20 boards in standard lengths, 91 m of timber in total. The cut list is optimised to keep offcuts small.

How many footings do I need?

9 footings. The most heavily loaded one carries 12.5 kN, which on firm friction soil means a footing of roughly Ø300–400 mm.

Similar plans

All plans → · Markdown version

The calculations are a design aid based on a simplified Eurocode 5. Connections, foundations and stability must be checked on site – have a structural engineer review the design if a permit is required.