Svenska Designer →

6×5 m raised attached deck – plans, timber list and sizes

This 6×5 m raised attached deck (30.0 m²) is carried by joists 45×145 at 496 mm c/c on beams 3 × 45×195 and posts 95×95, 6 footings in total. The sizes are calculated for 2.5 kN/m² imposed load and snow zone 2.0 – the cheapest combination of standard timber that passes bending, shear and deflection.

Frame drawing: 6×5 m raised attached deck
Frame drawing · 6×5 m raised attached deck · Download drawing (PNG)

Quick facts

Area
30.0 m²
Joists
45×145 c/c 496
Beams
3 × 45×195
Posts
6 × 95×95
Footings
6
Boards
31
Total timber
126 m

Member sizes

MemberSizeUtilisationGoverning
Joistsspan 2.46 m · c/c 496 mm · g 0.13 kN/m, q 1.24 kN/m 45×145 c/c 496 91% deflection
Beams2 rows · span 2.80 m between posts · g 0.74 kN/m, q 6.14 kN/m 3 × 45×195 96% bending
Postslength 0.78 m · N 19.3 kN (G+Q) · unbraced, Lef = 2L 95×95 42% buckling

Joist size by imposed load

Imposed load (kN/m²)Size
2.0 45×145 c/c 596
2.5 45×145 c/c 496
3.5 45×170 c/c 596
4.0 45×195 c/c 596

Timber list

QtySizeLengthTreatment
13 45×145 5.1 m Pressure treated NTR/AB
4 45×145 3.3 m Pressure treated NTR/AB
12 45×195 3.3 m Pressure treated NTR/AB
1 95×95 4.2 m Pressure treated NTR/AB
1 95×95 2.4 m Pressure treated NTR/AB

Good to know

FAQ

What size joists do I need for a 6×5 m raised attached deck?

45×145 at 496 mm c/c is enough for 2.5 kN/m² imposed load. That uses 91% of the capacity under Eurocode 5.

How big do the beams need to be?

The beams are 3 × 45×195. Always join beams over a post.

How much timber does it take?

The frame takes 31 boards in standard lengths, 126 m of timber in total. The cut list is optimised to keep offcuts small.

How many footings do I need?

6 footings. The most heavily loaded one carries 19.3 kN, which on firm friction soil means a footing of roughly Ø300–400 mm.

Similar plans

All plans → · Markdown version

The calculations are a design aid based on a simplified Eurocode 5. Connections, foundations and stability must be checked on site – have a structural engineer review the design if a permit is required.