4×4 m attached deck – plans, timber list and sizes
This 4×4 m attached deck (16.0 m²) is carried by joists 45×120 at 565 mm c/c on beams 45×195, 6 footings in total. The sizes are calculated for 2.5 kN/m² imposed load and snow zone 2.0 – the cheapest combination of standard timber that passes bending, shear and deflection.
Quick facts
- Area
- 16.0 m²
- Joists
- 45×120 c/c 565
- Beams
- 45×195
- Footings
- 6
- Boards
- 12
- Total timber
- 50 m
Member sizes
| Member | Size | Utilisation | Governing |
|---|---|---|---|
| Joistsspan 1.98 m · c/c 565 mm · g 0.14 kN/m, q 1.41 kN/m | 45×120 c/c 565 | 94% | deflection |
| Beams2 rows · span 1.80 m between posts · g 0.51 kN/m, q 4.94 kN/m | 45×195 | 95% | bending |
Joist size by imposed load
| Imposed load (kN/m²) | Size |
|---|---|
| 2.0 | 45×120 c/c 565 |
| 2.5 | 45×120 c/c 565 |
| 3.5 | 45×145 c/c 565 |
| 4.0 | 45×145 c/c 565 |
Timber list
| Qty | Size | Length | Treatment |
|---|---|---|---|
| 10 | 45×120 | 4.2 m | Pressure treated NTR/AB |
| 2 | 45×195 | 4.2 m | Pressure treated NTR/AB |
Good to know
- Ledger: fix it to the house frame (not the cladding) with structural screws/bolts every 400–600 mm and flash above it. The house wall must be able to take the load.
FAQ
What size joists do I need for a 4×4 m attached deck?
45×120 at 565 mm c/c is enough for 2.5 kN/m² imposed load. That uses 94% of the capacity under Eurocode 5.
How big do the beams need to be?
The beams are 45×195. Always join beams over a post.
How much timber does it take?
The frame takes 12 boards in standard lengths, 50 m of timber in total. The cut list is optimised to keep offcuts small.
How many footings do I need?
6 footings. The most heavily loaded one carries 9.8 kN, which on firm friction soil means a footing of roughly Ø300–400 mm.
Similar plans
The calculations are a design aid based on a simplified Eurocode 5. Connections, foundations and stability must be checked on site – have a structural engineer review the design if a permit is required.