# 3×2.4 m gable roof shed – plans, timber list and sizes

This 3×2.4 m shed (7.2 m²) with a gable roof is framed with wall studs 45×70 at 600 c/c and rafters 45×95 at 1200 c/c on a timber floor with 4 footings. The roof is sized for snow zone 2.0 kN/m² – see the table below for other parts of Sweden.

![Frame drawing: 3×2.4 m gable roof shed](https://raftor.app/en/shed/300x240-cm-gable-roof/shed-plans-300x240-cm-gable-roof.png)

## Member sizes

| Member | Size | Utilisation |
|---|---|---|
| Floor joists | 45×120 c/c 296 | 73% |
| Floor beams | 3 × 45×145 | 88% |
| Rafters | 45×95 c/c 1200 | 62% |
| Wall studs | 45×70 c/c 600 | 77% |
| Header – door 0.9 m×1.9 m, the front wall | 45×95 | 38% |
| Header – window 0.7 m×0.6 m, the left wall | 45×95 | 6% |

## Timber list

| Qty | Size | Length | Treatment |
|---|---|---|---|
| 1 | 45×70 | 5.4 m | Pressure treated NTR/AB |
| 1 | 45×70 | 4.5 m | Pressure treated NTR/AB |
| 6 | 45×70 | 5.4 m | C24 untreated |
| 1 | 45×70 | 4.5 m | C24 untreated |
| 8 | 45×70 | 4.2 m | C24 untreated |
| 3 | 45×95 | 5.1 m | C24 untreated |
| 2 | 45×120 | 5.4 m | Pressure treated NTR/AB |
| 4 | 45×120 | 4.8 m | Pressure treated NTR/AB |
| 1 | 45×120 | 2.4 m | Pressure treated NTR/AB |
| 1 | 45×120 | 5.1 m | C24 untreated |
| 1 | 45×120 | 3.3 m | C24 untreated |
| 6 | 45×145 | 3.3 m | Pressure treated NTR/AB |

## Rafters by snow zone

| Ground snow load sₖ (kN/m²) | Size |
|---|---|
| 1.0 (Malmö, Helsingborg) | 45×95 c/c 1200 |
| 1.5 (Göteborg, Kalmar) | 45×95 c/c 1200 |
| 2.0 (Stockholm) | 45×95 c/c 1200 |
| 2.5 (Karlstad, Gävle) | 45×95 c/c 1200 |
| 3.0 (Sundsvall, Umeå) | 45×95 c/c 1200 |
| 3.5 (Luleå) | 45×120 c/c 1200 |
| 4.5 (mountain areas) | 45×120 c/c 1200 |
| 5.5 (high mountains) | 45×145 c/c 1200 |

## FAQ

**What size joists do I need for a 3×2.4 m gable roof shed?**

45×120 at 296 mm c/c is enough for 2.5 kN/m² imposed load. That uses 73% of the capacity under Eurocode 5.

**How big do the beams need to be?**

The beams are 3 × 45×145. Always join beams over a post.

**What rafters do I need for a 3×2.4 m gable roof shed?**

45×95 at 1200 mm c/c in snow zone 2.0. In snow zone 3.5 you need 45×120 at 1200 c/c.

**How much timber does it take?**

The frame takes 35 boards in standard lengths, 156 m of timber in total. The cut list is optimised to keep offcuts small.

**How many footings do I need?**

4 footings. The most heavily loaded one carries 4.9 kN, which on firm friction soil means a footing of roughly Ø300–400 mm.

---
The calculations are a design aid based on a simplified Eurocode 5. Connections, foundations and stability must be checked on site – have a structural engineer review the design if a permit is required.

Source: https://raftor.app/en/shed/300x240-cm-gable-roof/
