# 2.4×1.8 m mono-pitch shed – plans, timber list and sizes

This 2.4×1.8 m shed (4.3 m²) with a mono-pitch roof is framed with wall studs 45×70 at 600 c/c and rafters 45×120 at 1200 c/c on a timber floor with 4 footings. The roof is sized for snow zone 2.0 kN/m² – see the table below for other parts of Sweden.

![Frame drawing: 2.4×1.8 m mono-pitch shed](https://raftor.app/en/shed/240x180-cm-mono-pitch/shed-plans-240x180-cm-mono-pitch.png)

## Member sizes

| Member | Size | Utilisation |
|---|---|---|
| Floor joists | 45×120 c/c 589 | 66% |
| Floor beams | 45×145 | 98% |
| Rafters | 45×120 c/c 1200 | 82% |
| Wall studs | 45×70 c/c 600 | 82% |
| Header – door 0.9 m×1.9 m, the front wall | 45×95 | 50% |
| Header – window 0.7 m×0.6 m, the left wall | 45×95 | 6% |

## Timber list

| Qty | Size | Length | Treatment |
|---|---|---|---|
| 1 | 45×70 | 5.1 m | Pressure treated NTR/AB |
| 1 | 45×70 | 2.7 m | Pressure treated NTR/AB |
| 4 | 45×70 | 5.4 m | C24 untreated |
| 1 | 45×70 | 5.1 m | C24 untreated |
| 3 | 45×70 | 4.8 m | C24 untreated |
| 4 | 45×70 | 4.2 m | C24 untreated |
| 1 | 45×70 | 3.6 m | C24 untreated |
| 1 | 45×95 | 2.1 m | C24 untreated |
| 1 | 45×120 | 5.4 m | Pressure treated NTR/AB |
| 1 | 45×120 | 5.1 m | Pressure treated NTR/AB |
| 1 | 45×120 | 3.6 m | Pressure treated NTR/AB |
| 1 | 45×120 | 5.1 m | C24 untreated |
| 1 | 45×120 | 2.7 m | C24 untreated |
| 1 | 45×145 | 5.1 m | Pressure treated NTR/AB |

## Rafters by snow zone

| Ground snow load sₖ (kN/m²) | Size |
|---|---|
| 1.0 (Malmö, Helsingborg) | 45×95 c/c 1200 |
| 1.5 (Göteborg, Kalmar) | 45×95 c/c 1200 |
| 2.0 (Stockholm) | 45×120 c/c 1200 |
| 2.5 (Karlstad, Gävle) | 45×120 c/c 1200 |
| 3.0 (Sundsvall, Umeå) | 45×145 c/c 1200 |
| 3.5 (Luleå) | 45×145 c/c 1200 |
| 4.5 (mountain areas) | 45×170 c/c 1200 |
| 5.5 (high mountains) | 45×195 c/c 1200 |

## FAQ

**What size joists do I need for a 2.4×1.8 m mono-pitch shed?**

45×120 at 589 mm c/c is enough for 2.5 kN/m² imposed load. That uses 66% of the capacity under Eurocode 5.

**How big do the beams need to be?**

The beams are 45×145. Always join beams over a post.

**What rafters do I need for a 2.4×1.8 m mono-pitch shed?**

45×120 at 1200 mm c/c in snow zone 2.0. In snow zone 3.5 you need 45×145 at 1200 c/c.

**How much timber does it take?**

The frame takes 22 boards in standard lengths, 98 m of timber in total. The cut list is optimised to keep offcuts small.

**How many footings do I need?**

4 footings. The most heavily loaded one carries 3.0 kN, which on firm friction soil means a footing of roughly Ø300–400 mm.

---
The calculations are a design aid based on a simplified Eurocode 5. Connections, foundations and stability must be checked on site – have a structural engineer review the design if a permit is required.

Source: https://raftor.app/en/shed/240x180-cm-mono-pitch/
